diff --git a/.gitignore b/.gitignore
index f453074..d73a1f8 100644
--- a/.gitignore
+++ b/.gitignore
@@ -4,3 +4,5 @@ secrets.h
 .*.swo
 build.py
 *.bak
+*.stl
+*.gcode
diff --git a/hardware/case/bh1750/BH1750-box.scad b/hardware/case/bh1750/BH1750-box.scad
new file mode 100644
index 0000000..c668b54
--- /dev/null
+++ b/hardware/case/bh1750/BH1750-box.scad
@@ -0,0 +1,67 @@
+inner_box = [15, 3, 20];
+wall_strength = 2;
+
+
+
+
+difference() {
+  difference() {
+    cube(size=[inner_box[0]+wall_strength*2, inner_box[1]+wall_strength*2, inner_box[2]+wall_strength], center=true);
+    translate([0,0,wall_strength]) {
+      cube(size=[inner_box[0], inner_box[1], inner_box[2]+wall_strength], center=true);
+    };
+  };
+
+  translate([0, wall_strength / 2, (inner_box[2]/2 - wall_strength/2)]) {
+    cube(size=[inner_box[0] + wall_strength * 2, inner_box[1] + wall_strength, 4], center=true);
+  };
+
+
+  translate([0, -(wall_strength/2 + inner_box[1]/2), (((inner_box[2]- (8+5.5))/2) -inner_box[2]/2 + wall_strength/2 + 5.5) ]) {
+    cube(size=[inner_box[0]-3.5, wall_strength, inner_box[2]- (8+5.5)], center=true);
+  };
+};
+
+translate([inner_box[0]/2+wall_strength/2,inner_box[1]/2+wall_strength,(inner_box[2]/2+wall_strength/2)-4]) {
+  rotate([180,0,90]) {
+    translate([-(wall_strength+inner_box[1]), -wall_strength/2, 0]){
+      polyhedron(
+        points=[ [0,0,0],
+                 [inner_box[1]+wall_strength,0,0],
+                 [inner_box[1]+wall_strength,wall_strength,0],
+                 [0,wall_strength,0],
+                 [0,0,-4],
+                 [0,wall_strength,-4],
+        ],
+        faces=[ [0,1,2,3],
+                [5,4,0,3],
+                [4,1,0],
+                [3,2,5],
+                [2,1,4,5],
+              ]
+      );
+    }
+  }
+}
+
+translate([-(inner_box[0]/2+wall_strength/2),inner_box[1]/2+wall_strength,(inner_box[2]/2+wall_strength/2)-4]) {
+  rotate([180,0,90]) {
+    translate([-(wall_strength+inner_box[1]), -wall_strength/2, 0]){
+      polyhedron(
+        points=[ [0,0,0],
+                 [inner_box[1]+wall_strength,0,0],
+                 [inner_box[1]+wall_strength,wall_strength,0],
+                 [0,wall_strength,0],
+                 [0,0,-4],
+                 [0,wall_strength,-4],
+        ],
+        faces=[ [0,1,2,3],
+                [5,4,0,3],
+                [4,1,0],
+                [3,2,5],
+                [2,1,4,5],
+              ]
+      );
+    }
+  }
+}
diff --git a/hardware/case/multi-esp/multi-esp-box.scad b/hardware/case/multi-esp/multi-esp-box.scad
new file mode 100644
index 0000000..cc77a26
--- /dev/null
+++ b/hardware/case/multi-esp/multi-esp-box.scad
@@ -0,0 +1,252 @@
+// for board_support()
+bs_height = 5;
+bs_width = 8;
+
+// for connector_holes()
+hole_height = 6;
+hole_width = 15;
+hole_bottom_offset = 4;
+
+connector_space = 5.5;
+
+// for microusb_hole()
+microusb_height = 6;
+microusb_width = 8;
+microusb_border_offset = 14;
+microusb_bottom_offset = 14;
+
+// for dc_hole()
+dc_plug_offset = 25;
+dc_width = 9;
+dc_depth = 3.5;
+dc_height = 11;
+dc_outer_strength = 2;
+dc_support_height = 10;
+dc_support_hole_support_bottom_offset = 3;
+
+// for case()
+base_cube = [68, 50, 25 + bs_height];
+wall_strength = 2;
+
+module case() {
+  difference() {
+    cube(size = base_cube, center = true);
+    translate([0, 0, wall_strength]) {
+      cube(size = [base_cube[0] - wall_strength, base_cube[1] - wall_strength, base_cube[2]], center = true);
+    };
+  };
+};
+
+module board_support() {
+  bs_offset_y = base_cube[1] / 2 - bs_width / 2;
+  bs_offset_z = base_cube[2] / 2 - bs_height / 2;
+  bs_offset_x = base_cube[0] / 2 - bs_width / 2;
+  translate([bs_offset_x, -0, -bs_offset_z]) {
+    cube(size = [bs_width, base_cube[1], bs_height] , center = true);
+  };
+  
+  translate([-bs_offset_x, 0, -bs_offset_z]) {
+    cube(size = [bs_width, base_cube[1], bs_height] , center = true);
+  }
+}
+
+module connector_holes() {
+  conn_offset_x = base_cube[0] / 2;
+  conn_offset_y = hole_width / 2 + connector_space / 2;
+  conn_offset_z = base_cube[2] / 2 - hole_height / 2 - hole_bottom_offset - bs_height;
+  translate([conn_offset_x, conn_offset_y, -conn_offset_z]) {
+    cube(size=[wall_strength, hole_width, hole_height], center=true);
+  }
+  
+  translate([conn_offset_x, -conn_offset_y, - conn_offset_z]) {
+    cube(size=[wall_strength, hole_width, hole_height], center=true);
+  }
+}
+
+module microusb_hole() {
+  musb_offset_x = base_cube[0] / 2;
+  musb_offset_y = base_cube[1] / 2 - microusb_width / 2 - microusb_border_offset;
+  musb_offset_z = base_cube[2] / 2 - microusb_height / 2 - microusb_bottom_offset - bs_height;
+
+  translate([-musb_offset_x, musb_offset_y, -musb_offset_z]) {
+    cube(size=[wall_strength, microusb_width, microusb_height], center=true);
+  }
+}
+
+
+module top_support_corner() {
+  polyhedron(
+    points=[ [6,6,0],
+             [6,-6,0],
+             [-6,-6,0],,
+             [6,-6,-10]  ],
+    faces=[ [1,0,3],
+            [2,0,1],
+            [3,2,1],
+            [0,2,3]
+          ]
+  );
+};
+
+module corner_with_hole() {
+  difference() {
+    top_support_corner();
+    support_corner_holes();
+  };
+}
+
+module support_corners() {
+  sc_offset_x = base_cube[0] / 2 - 6;
+  sc_offset_y = base_cube[1] / 2 - 6;
+  sc_offset_z = base_cube[2] / 2;
+  
+  translate([sc_offset_x, -sc_offset_y, sc_offset_z]) {
+    rotate([0,0,0]) {
+      corner_with_hole();
+    };
+  };
+  
+  translate([sc_offset_x, sc_offset_y, sc_offset_z]) {
+    rotate([0,0,90]) {
+      corner_with_hole();
+    };
+  };
+  
+  translate([-sc_offset_x, sc_offset_y, sc_offset_z]) {
+    rotate([0,0,180]) {
+      corner_with_hole();
+    };
+  };
+  
+  /* Disabled for DC hole
+  translate([-sc_offset_x, -sc_offset_y, sc_offset_z]) {
+    rotate([0,0,270]) {
+      corner_with_hole();
+    };
+  };
+  */
+}
+
+module support_corner_holes() {
+  translate([2.5, -2.5, -6]) {
+    cylinder(r=1.75,h=6,$fn=50);
+  };
+}
+
+module top_base_hole() {
+  sc_offset_x = base_cube[0] / 2 - 6;
+  sc_offset_y = base_cube[1] / 2 - 6;
+  sc_offset_z = base_cube[2] / 2;
+  translate([sc_offset_x, -sc_offset_y, wall_strength / 2]) {
+    support_corner_holes();
+  };
+}
+
+module top_diagonal_hole_set() {
+  top_base_hole();
+  
+  rotate(180) {
+    top_base_hole();
+  };
+}
+
+module top_holes() {
+  top_diagonal_hole_set();
+  mirror([1, 0, 0]) {
+    top_diagonal_hole_set();
+  };
+}
+
+module top() {
+  translate([0, 0, -base_cube[2] / 2 + wall_strength / 2]) {
+    difference() {
+      cube(size = [base_cube[0], base_cube[1], wall_strength], center = true);
+      top_holes();
+    };
+  };
+}
+
+
+module dc_hole() {
+  translate([-dc_plug_offset, -(base_cube[1]/2), (dc_width/2) + dc_support_hole_support_bottom_offset - dc_outer_strength/2]) {
+    rotate([0, 0, 90]){
+      cube(size=[wall_strength,dc_width,dc_width], center=true);
+    }
+  };
+}
+
+module dc_support() {
+  translate([-dc_plug_offset, -(base_cube[1]/2)+dc_depth-wall_strength/2, 0]) {
+    rotate([0, 0, 90]){
+      dc_support_ramp();
+      dc_support_frame();
+    }
+  };
+};
+
+module dc_support_frame() {
+  pillar_offset_y = (dc_width/2)+(dc_outer_strength/2);
+  pillar_offset_z = (dc_height/2);
+  beam_offset_z = dc_height + dc_outer_strength/2;
+  
+  translate([0, -pillar_offset_y, pillar_offset_z]) {
+    dc_support_pillar();
+  }
+
+  translate([0, pillar_offset_y, pillar_offset_z]) {
+    dc_support_pillar();
+  }
+  
+  
+  translate([0, 0, beam_offset_z]) {
+    dc_support_beam();
+  };
+}
+
+module dc_support_pillar() {
+  cube(size=[dc_depth, dc_outer_strength, dc_height], center=true);
+}
+
+module dc_support_beam() {
+  dc_support_width = dc_width + dc_outer_strength*2;
+  cube(size=[dc_depth, dc_support_width, dc_outer_strength], center=true);
+}
+
+module dc_support_ramp() {
+  dc_support_width = dc_width + dc_outer_strength*2;
+
+  translate([-(dc_depth/2),-(dc_support_width/2),0]) {
+    polyhedron(
+      points=[ [0,0,0],
+               [dc_depth,0,0],
+               [dc_depth,dc_support_width,0],
+               [0,dc_support_width,0],
+               [0,0,-dc_support_height],
+               [0,dc_support_width,-dc_support_height],
+      ],
+      faces=[ [0,1,2,3],
+              [5,4,0,3],
+              [4,1,0],
+              [3,2,5],
+              [2,1,4,5],
+            ]
+    );
+  };
+}
+
+
+translate([0, base_cube[1] + 10, 0]) {
+  translate([0, base_cube[1] + 10, 0]) {
+    difference() {
+      case();
+      connector_holes();
+      microusb_hole();
+    dc_hole();
+    }
+    dc_support();
+    board_support();
+    support_corners();
+  };
+
+  top();
+};
\ No newline at end of file