.gitignore

@@ -1,4 +0,0 @@
-__pycache__/
-*.pyc
-
-.*.sw?

README.md

@@ -1,11 +1,3 @@
-# SEM6000 Python Library
-
-SEM6000 is a energy meter and power switch with Bluetooth 4.0.
-
-This library provides a Python module for these devices
-
-## Run the example code
-
 ```
 $ git clone … sem6000
 $ cd sem6000
@@ -14,51 +6,3 @@ $ . ./python3_venv/bin/activate
 $ pip3 install -r requirements.txt
 $ python3 example.py
 ```
-
-## Collectd Plugin
-
-You can find a Plugin for [collectd](https://collectd.org) in the `collectd`
-subdirectory.
-
-Installation procedure (the target directory may be changed of course):
-
-```shell
-# mkdir -p /usr/local/lib/collectd/python
-# cp collectd/collectd_sem6000.py /usr/local/lib/collectd/python
-# cp sem6000.py /usr/local/lib/collectd/python
-```
-
-Add or adjust the configuration for your collectd’s Python plugin as follows:
-
-```
-<Plugin python>
-  ModulePath "/usr/local/share/collectd/python"
-  LogTraces true
-  Interactive false
-  Import "collectd_sem6000"
-
-  <Module collectd_sem6000>
-    Address "12:34:56:78:90:ab"
-    SocketName "FirstSocket"
-    ReadTimeout 30
-    SuspendTime 300
-  </Module>
-  <Module collectd_sem6000>
-    Address "ab:cd:ef:13:37:42"
-    SocketName "ASecondSocket"
-  </Module>
-  # ...
-</Plugin>
-```
-
-`ReadTimeout` and `SuspendTime` control what’s happening when a device is
-unavailable. If no value could be retrieved for `ReadTimeout` seconds, the
-plugin does not retry for `SuspendTime` seconds. After that, normal operation
-is resumed. This procedure ensures that an unreachable device does not block
-other devices (too often) in the current single-threaded architecture.
-
-If not specified, `ReadTimeout` is 30 seconds and `SuspendTime` is 5 minutes.
-
-Make sure that everything listed in `requirements.txt` is available to the user
-running collectd.
-

collectd/collectd_sem6000.py

@@ -1,144 +0,0 @@
-#!/usr/bin/env python3
-# coding: utf-8
-# vim: noet ts=2 sw=2 sts=2
-
-import os
-import time
-import collectd
-
-from sem6000 import SEMSocket
-import bluepy
-
-instances = []
-
-def init_func():
-	pass
-
-def config_func(cfg):
-	global instances
-
-	config = {}
-
-	for node in cfg.children:
-		key = node.key.lower()
-		value = node.values[0]
-
-		if key in ['address', 'socketname']:
-			config[key] = value
-
-		if key == 'readtimeout':
-			config['readtimeout'] = int(value)
-
-		if key == 'suspendtime':
-			config['suspendtime'] = int(value)
-
-	if 'address' not in config.keys():
-		collectd.error('sem6000: address must be set')
-		return
-
-	if 'socketname' not in config.keys():
-		config['socketname'] = config['address'].replace(':', '')
-
-	if 'readtimeout' not in config.keys():
-		config['readtimeout'] = 30
-
-	if 'suspendtime' not in config.keys():
-		config['suspendtime'] = 300
-
-	instances.append( {
-		'config': config,
-		'socket': None,
-		'suspended': False,
-		'lastsuccess': 0,
-		'resumetime': 0
-		} )
-
-def read_func():
-	global instances
-
-	for inst in instances:
-		config = inst['config']
-
-		if inst['suspended']:
-			if time.time() < inst['resumetime']:
-				continue
-			else:
-				collectd.info("sem6000: Device {} waking up.".format(config['address']))
-				inst['suspended'] = False
-				inst['lastsuccess'] = time.time()
-
-		try:
-			if inst['socket'] == None:
-				collectd.info("sem6000: Connecting to {}...".format(config['address']))
-
-				inst['socket'] = SEMSocket(config['address'])
-				collectd.info("sem6000: Connected.")
-
-			inst['socket'].getStatus()
-		except (SEMSocket.NotConnectedException, bluepy.btle.BTLEDisconnectError, BrokenPipeError) as e:
-			collectd.warning("sem6000: Exception caught: {}".format(e))
-			collectd.warning("sem6000: Restarting on next cycle...")
-
-			if inst['lastsuccess'] < time.time() - config['readtimeout']:
-				collectd.error("sem6000: no successful communication with {} for {:.1f} seconds. Suspending device for {:.1f} seconds.".format(
-					config['address'], config['readtimeout'], config['suspendtime']))
-
-				inst['suspended'] = True
-				inst['resumetime'] = time.time() + config['suspendtime']
-
-			if inst['socket'] != None:
-				inst['socket'].disconnect()
-				inst['socket'] = None
-
-		socket = inst['socket']
-
-		if socket != None and socket.voltage != 0:
-			collectd.debug("Uploading values for {}".format(socket.mac_address))
-
-			inst['lastsuccess'] = time.time()
-
-			val = collectd.Values(plugin = 'sem6000-{}'.format(config['socketname']))
-
-			val.type = 'voltage'
-			val.type_instance = 'grid'
-			val.values = [ socket.voltage ]
-			val.dispatch()
-
-			val.type = 'current'
-			val.type_instance = 'load'
-			val.values = [ socket.current ]
-			val.dispatch()
-
-			val.type = 'power'
-			val.type_instance = 'real_power'
-			val.values = [ socket.power ]
-			val.dispatch()
-
-			val.type = 'gauge'
-			val.type_instance = 'power_factor'
-			val.values = [ socket.power_factor ]
-			val.dispatch()
-
-			val.type = 'gauge'
-			val.type_instance = 'load_on'
-			val.values = [ socket.powered ]
-			val.dispatch()
-
-			val.type = 'frequency'
-			val.type_instance = 'grid'
-			val.values = [ socket.frequency ]
-			val.dispatch()
-
-def shutdown_func():
-	global instances
-
-	for inst in instances:
-		if inst['socket'] != None:
-			inst['socket'].disconnect()
-
-	instances = []
-
-collectd.register_config(config_func)
-collectd.register_init(init_func)
-collectd.register_read(read_func)
-collectd.register_shutdown(shutdown_func)

example.py

@@ -1,37 +1,23 @@
-#!/usr/bin/env python3
-
 import time
 from sem6000 import SEMSocket
 
-import bluepy
-
-socket = None
-
-while True:
-    time.sleep(1)
-    try:
-        if socket == None:
-            print("Connecting...")
-
 # auto_reconnect_timeout enabled auto reconnect if sending a command fails. Valid values:
 # None (default): everything that fails throws NotConnectedException's
 # -1: infinite retries
 # integer: seconds before exception is thrown
 
-            socket = SEMSocket('f0:c7:7f:0d:e7:17')
-            print("Connected.")
+socket = SEMSocket('f0:c7:7f:0d:e7:17', auto_reconnect_timeout=None)
 
 #socket.login("1337")
 #socket.changePassword("1234")
 #socket.login("1234")
 
+while True:
+    time.sleep(1)
+    try:
         socket.getStatus()
         socket.setStatus(True)
         print("=== {} ({}) ===".format(socket.mac_address, "on" if socket.powered else "off"))
-        print("\t{}V {}A → {}W@{}Hz (PF: {})".format(socket.voltage, socket.current, socket.power, socket.frequency, socket.power_factor))
-    except (SEMSocket.NotConnectedException, bluepy.btle.BTLEDisconnectError, BrokenPipeError):
-        print("Restarting...")
-        if socket != None:
-            socket.disconnect()
-            socket = None
-
+        print("\t{}V {}A → {}W@{}Hz".format(socket.voltage, socket.current, socket.power, socket.frequency))
+    except SEMSocket.NotConnectedException:
+        socket.reconnect(-1) #infinite reconnect attempts

sem6000.py

@@ -4,11 +4,11 @@ import uuid
 
 class SEMSocket():
     password = "0000"
+    auto_reconnect_timeout = None
     powered = False
     voltage = 0
     current = 0
     power = 0
-    power_factor = 0
     frequency = 0
     mac_address = ""
     custom_service = None
@@ -17,8 +17,9 @@ class SEMSocket():
     _notify_char = None
     _btle_device = None
 
-    def __init__(self, mac):
+    def __init__(self, mac, auto_reconnect_timeout = None):
         self.mac_address = mac
+        self.auto_reconnect_timeout = auto_reconnect_timeout
         self._btle_device = btle.Peripheral(None ,addrType=btle.ADDR_TYPE_PUBLIC,iface=0)
         try:
             self.reconnect()
@@ -79,9 +80,18 @@ class SEMSocket():
         except:
             return False
 
-    def reconnect(self):
+    def __reconnect(self):
         self.disconnect()
         self.connect()
+
+    def reconnect(self, timeout = None):
+        if timeout == None:
+            self.__reconnect()
+        else:
+            reconnect_start = time.time()
+            while abs(reconnect_start - time.time()) < timeout or timeout == -1:
+                self.__reconnect()
+
         if not self.connected:
             raise self.NotConnectedException
 
@@ -172,7 +182,7 @@ class SEMSocket():
 
         def send(self):
             if not self.__btle_device.connected:
-                self.__btle_device.reconnect()
+                self.__btle_device.reconnect(self.__btle_device.auto_reconnect_timeout)
 
             self.__btle_device._write_char.write(self.__data, True)
             self.__btle_device._btle_device.waitForNotifications(5)
@@ -194,18 +204,11 @@ class SEMSocket():
                 print("Switch toggled")
                 self.__btle_device.getStatus()
             elif message_type == 0x04: #status related data
-                voltage = data[8]
-                current = (data[9] << 8 | data[10]) / 1000
-                power   = (data[5] << 16 | data[6] << 8 | data[7]) / 1000
-
-                self.__btle_device.voltage = voltage
-                self.__btle_device.current = current
-                self.__btle_device.power   = power
+                self.__btle_device.voltage = data[8]
+                self.__btle_device.current = (data[9] << 8 | data[10]) / 1000
+                self.__btle_device.power = (data[5] << 16 | data[6] << 8 | data[7]) / 1000
                 self.__btle_device.frequency = data[11]
                 self.__btle_device.powered = bool(data[4])
-
-                # calculated values
-                self.__btle_device.power_factor = power / (voltage * current)
             elif message_type == 0x17:
                 if data[5] == 0x00 or data[5] == 0x01:
                     if data[4]: